Hyundai i10 Fuel Consumption (MPG & km/L)

How do the new i10 petrol engines perform?

Backed up by Hyundai’s impressive five-year, unlimited mileage warranty, the i10 is likely to provide years of faithful service. And with standard electronic stability control, tyre pressure monitoring and six airbags it should prove to be a safe place to be too, when put through the rigours of Euro NCAP safety testing.

Two petrol engines are on offer – a three-cylinder 1.0-litre, with and without BlueDrive fuel-saving measures, and a four-cylinder 1.2-litre. At 65.7mpg and 98g/km CO2 the 1.0 SE BlueDrive is the cheapest in the range to run.

Unsurprisingly, those same virtues ensure that Hyundai i10 emissions are low.

The 1.0 SE BlueDrive is the cleanest in the range, emitting 98g/km during stop/start.

Hyundai i10 Fuel Efficiency Figures

The fuel consumption of the Hyundai i10 is shown below in both MPG (Miles Per Gallon) and km/L (Kilometers Per Litre). Both of these figures show you how far that particular Hyundai i10 variant can travel for every gallon (4.55 litres) and every litre (1000ml) of fuel. The higher the MPG or km/L value, the more economical the car is and the cheaper it will be to run. As well as providing the combined figures, we also give you the fuel consumption you can expect from a Hyundai i10 in urban / city driving conditions as well as what can be expected on the open highway / motorway.

How To Calculate Real Fuel Consumption Of Your Hyundai i10

The 'real fuel consumption' shows you the amount of fuel your Hyundai i10 is consuming to travel a fixed distance. This is normally shown as L/100km. This figure shows you the amount of fuel consumed in litres for every 100kms travelled. This is the most commonly used figure for showing the fuel consumption of a vehicle. The formula to calculate it is:

(Litres of fuel used X 100) / Kilometers travelled = L/km.

Why not try our free online fuel consumption calculator and work out your own figures.